For many years I have recognized that the easiest and most cost effective way to enhance the beauty of any room is to add a crown molding. The expense associated with buying and installing crown moulding is well below the expenses associated with other remodeling enhancements. Crown moulding is often the difference between the everyday and the inspiring.

Our high density polyurethane moldings, however, bring the inspirational to another level. The traditional design motifs available in polyurethane are either not achievable in wood crown moldings or beyond the financial ability of most homeowners. The costs of the installation of a plaster cornice are equally out of reach for most. Engineers of our urethane moldings have accomplished what could not be achieved in wooden or plaster moldings.

Our designs and attention to detail will far exceed that of ordinary crown. The installation of polyurethane mouldings can be simplified with the use of our pre-mitered inside and outside corners, corner drops and center keys. If you do not want to miter “butt” and corner joints, use our pre-mitered pieces for ease of installation as well as beauty.

Installation is similar to installing wood crown molding with the exception that a construction adhesive should be applied. A few finish nails are required to hold the moldings until the adhesive sets. Afterward the glue cures use a painter’s caulk and sand the joints as you would with a wood molding.