For some time I have recognized that the easiest and most reasonably priced way to enhance the beauty of any room is to add a crown molding. The expense associated with buying and installing crown moulding is well below the costs of most other remodeling enhancements. Crown molding is often the difference between the everyday and the awe inspiring.

High density polyurethane mouldings, however, bring the inspirational to a higher plateau. The classic design patterns available in urethane are either not achievable in wood crown moldings or beyond the financial grasp of most folks. The costs of the installation of a plaster cornice are equally out of reach for most. Engineers of our urethane moulding have achieved what could not be achieved in wooden or plaster mouldings.

Our designs and attention to detail will far exceed that of ordinary crown. As a bonus, the installation of polyurethane mouldings can be simplified with the use of our pre-mitered inside and outside corners, corner drops and center keys. If you do not want to miter “butt” and corner joints, use our pre-mitered pieces for ease of installation as well as beauty.

Installation is similar to installing wood with the exception that a construction adhesive should be used. A few finish nails are required to hold the moldings until the adhesive cures. Afterward the glue cures use a painter’s caulk and sand the joints as you would with a wood molding.