3 1/8"h X 2" ceiling projectionN X 94-1/2"L Click on the image for a larger view. You can order a 6" sample piece of OrCr-140 here: OrCr-140-sample
Over the years, I discovered that the easiest and most reasonably priced way to enhance the beauty of any room is to add a crown moulding. The expense associated with buying and installing crown molding is well below the expenses associated with other home improvement enhancements. Crown molding can make the difference between the common and the awe inspiring. Our high density urethane moldings, however, move the inspirational to another point. The traditional design motifs available in urethane are either not achievable in wood crown moldings or outside the economic grasp of most homeowners. The costs of the installation of a plaster cornice are equally beyond the reach for most. Designers of our urethane moldings have realized what could not be realized in wooden or plaster moldings.
We are sure you will find our designs and attention to detail to far exceed that of ordinary crown. The installation of urethane mouldings can be simplified with the use of our pre-mitered inside and outside corners, corner drops and center keys. If you do not want to miter “butt” and corner joints, use our pre-mitered pieces for ease of installation as well as beauty.
Installation is similar to installing wood crown molding with the exception that a construction adhesive should be used. A few finish nails are required to hold the moldings until the adhesive sets. Afterward the glue sets use a painter’s caulking and sand the joints as you would with a wood molding.
|