Over the years, I discovered the easiest and most cost effective way to enhance the beauty of any room is to install a crown moulding. The material and installation costs of crown molding are well below the costs of most other remodeling enhancements. Crown molding is often the difference between the common and the inspiring.

Our high density polyurethane moldings, however, bring the inspirational to another level. The traditional design motifs of urethane are either not possible in wood crown moldings or beyond the economic ability of most folks. The expenses associated with the installation of a plaster cornice are equally beyond the reach for most. Engineers of our polyurethane moulding have carried out what could not be accomplished in wooden or plaster moldings.

We are certain you will find our profiles and attention to detail to far exceed that of ordinary crown moulding. As a bonus, the installation of urethane moldings can be simplified with the use of our pre-mitered inside and outside corners, corner drops and center keys. If you do not want to miter “butt” and corner joints, use our pre-mitered pieces for ease of installation as well as beauty.

Installation is similar to installing wood with the exception that a construction adhesive should be used. A few finish nails are required to hold the moldings until the adhesive sets. Afterward the glue sets use a painter’s caulk and sand the joints as you would with a wood molding.