Over the years, I have known that the easiest and most cost effective way to beautify any room is to install a crown moulding. The expense associated with buying and installing crown moulding is well below the expenses associated with other remodeling enhancements. Crown molding is often the difference between the commonplace and the awe inspiring.

Our high density urethane moldings, however, move the inspirational to another level. The traditional design motifs of urethane are either not possible in wood crown mouldings or outside the economic grasp of most people. The costs of the installation of a plaster cornice are equally out of reach for most. Designers of our urethane moulding have achieved what could not be achieved in wood or plaster mouldings.

We are certain you will find our designs and attention to detail to far exceed that of ordinary crown. As a bonus, the installation of polyurethane mouldings can be simplified with the use of our pre-mitered inside and outside corners, corner drops and center keys. If you do not want to miter “butt” and corner joints, use our pre-mitered pieces for ease of installation as well as beauty.

Installation is similar to installing wood crown molding with the exception that a construction adhesive should be applied. A few finish nails are required to hold the moldings until the adhesive cures. Afterward the glue cures use a painter’s caulk and sand the joints as you would with a wood molding.