6-7/8"H X 5-1/8"ceiling projection X 94-1/2"Long for a larger view please click on the image. If you would like a 6" sample of the LaCr-203 please click here: LaCr-203-sample Pre-mitered corners are available for this crown molding profile. LaCr 203 Inside Corner LaCr 203 Outside Corner
For some time I have recognized that the simplest and most economical way to beautify any room is to install a crown moulding. The costs of material and installation of crown molding are well below the costs of most other remodeling enhancements. Crown moulding can make the difference between the average and the awe inspiring.
Our high density polyurethane mouldings, however, bring the inspirational to a higher point. The classic design patterns available in polyurethane are either not achievable in wood crown mouldings or beyond the economic ability of most folks. The costs of the installation of a plaster cornice are equally beyond the reach for most. Engineers of our polyurethane moulding have realized what could not be accomplished in wood or plaster moldings.
We are confident you will find our designs and attention to detail to far exceed that of ordinary crown molding. The installation of polyurethane moldings can be simplified with the use of our pre-mitered corners. See the links above. You can also use our drops such as the: CorDro-58 CorDro-59 CorDro-60
Installation Installation is similar to installing wood crown molding with the exception that a construction adhesive should be used. A few finish nails are required to hold the moldings until the adhesive sets. Afterward the glue sets use a painter’s caulking and sand the joints as you would with a wood molding.
|